Aplicación AMEF con MOORA para la evaluación de un caso
DOI:
https://doi.org/10.61799/2216-0388.627Palabras clave:
FMEA, MOORA, AHP, RPNResumen
El análisis de modo y efecto de falla (AMEF) es un método para identificar y evaluar los riesgos potenciales empleando un numero de prioridad de riesgo RPN para evaluar las influencias de las fallas y así poder lanzar una acción recomendada. El RPN es el resultado de la combinación de la severidad (S), ocurrencia (O) y detección de la falla (D), en una escala numérica del 1 al 10. Sin embargo, el uso del RPN suele tener defectos al ser inconsistente al momento de suponer las igualdades de las importancias de S, O, D. Por lo tanto, en esta investigación tiene como objetivo resolver las limitaciones que representa el método AMEF con la integración el método MOORA, para evaluar nos apoyaremos con el proceso de jerarquía analítica difusa (AHP), en el que AHP se utilizara para modificar los valores de RPN, se aplica el método MOORA para examinar las diferentes alternativas de soluciones que tenemos. Finalmente realizaremos una aplicación a un proceso para verificar la efectividad de nuestro método hibrido difuso en AMEF.
Descargas
Citas
J. Tixier, G. Desserre, O. Salvi y D. Gaston, ¨Review of 62 risk análisis methodologies of industrial plants¨, Journal of Loss Prevention in the Process Industries, vol. 15, no. 4, pp. 291-303, 2002
A.P. Subriadi y N.F. Najwa, ¨The consistency analysis of failure mode and effect analysis (FMEA) in information technology risk assessment¨, Heliyon, vol. 6, no.1, 2020
LL.C. Chrysler, Ford Motor Company, General Motors Corporation, Análisis de Modos y Efectos de Fallas Potenciales, cuarta edición 2008
M. Ekmekçioğlu y A.C. Kutlu, ¨A fuzzy hybrid approach for fuzzy process FMEA: An application to a spindle manufacturing process¨, International Journal of Computational Intelligence Systems, vol. 5, no. 4, pp 611-626, 2012
A.C. Kutlu y M. Ekmekçioğlu, ¨ Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP¨, Expert Systems with Applications, vol. 39, no.1, pp. 61-67, 2012
K. Chang, Y. Chang y I. Tsai, ¨Enhancing FMEA assessment by integrating grey relational analysis and the decision making trial and evaluation laboratory approach¨, Engineering Failure Analysis, vol. 31, pp. 211-224, 2013
H. Maleki y Y. Saadat, ¨Comparison of failure mode and effects analysis by using AHP vs. REMBRANDT system¨, International Journal of Industrial and Systems Engineering, vol. 14, no. 1, pp. 5-19, 2013
A. M. Mahmoodi y A. Mirzazadeh, ¨ A New Analysis of Failure Models and Effects by Fuzzy Todim with using Fuzzy Time Function¨, International Journal of Fuzzy Logic System, vol. 4, no. 2, pp. 7-21, 2014
I. Haq, Izhar, K. Shah, S. Anwar, M. T. Khan, B Ahmed y S. Maqsood, ¨ Fuzzy logic based failure mode and effect analysis of automotive powertrain assembly systems¨, Technical Journal, vol. 20(SI),no. 2(S), pp. 57-64, 2015
E. Bozdag, U. Asan, A. Soyer, S. Serdarasan, ¨Risk prioritization in Failure Mode and Effects Analysis using interval type-2 fuzzy sets¨, Expert Systems with Applications, vol.42, no. 8, pp. 4000-4015, 2015
M. Ahmadi, S. M. H. Molana y S. M. Sajadi, ¨ A hybrid FMEA-TOPSIS method for risk management, case study: Esfahan Mobarakeh Steel Company¨, International Journal of Process Management and Benchmarking, vol. 7, no. 3, pp. 397-408, 2017
A. Certa, M. Enea, G. M. Galante y C.M. La Fata, ¨ ELECTRE TRI-based approach to the failure modes classification on the basis of risk parameters: An alternative to the risk priority number¨, Computers & Industrial Engineering, vol. 108, pp. 100-110, 2017
J. K. Chen, ¨ Prioritization of corrective actions from utility viewpoint in FMEA application ¨, Quality and Reliability Engineering International, vol. 33, no. 4, pp. 883-894, 2017.
M. Hajimolaali, A. Kebriaeezadeh, A. Abdollahiasl, H. Safari y A. Yektadoost, ¨A new approach in identifying and evaluating quality risks in the pharmaceutical industry¨, Journal of Pharmacoeconomics and Pharmaceutical Management, vol. 3, no. ½, pp. 17-20, 2017
H. Zhao, J. X. You y H. C. Liu, ¨ Failure mode and effect analysis using MULTIMOORA method with continuous weighted entropy under interval-valued intuitionistic fuzzy environment¨, Soft Computing, vol. 21, no. 18, pp. 5355-5367, 2017
N. Banduka, D. Tadić, I. Mačužić y M. Crnjac, ¨Extended process failure mode and effect analysis (PFMEA) for the automotive industry: The FSQC-PFMEA¨, Advances in Production Engineering & Management, vol. 13, no. 2, pp. 206-215, 2018
T.L. Saaty. The analytic hierarchy process. McGraw-Hill, New York, 1980. (This book has been translated into Chinese by S. Xu et al.; information is available from them at the Inst. of Systems Engineering, Tianjin Univ., Tianjin, China.) (A translation into Russian by R. Vachnadze is currently underway.)
W.R. Magalhães y R.F.L. Junior, ¨A model based on FMEA and Fuzzy TOPSIS for risk prioritization in industrial processes¨, Gestão & Producão, vol. In press, 2020. https://www.researchgate.net/publication/343700369
L.P. Dominguez, L.A.R. Picon, A.A. Iniesta, D.L. Cruz y Z. Xu, ¨MOORA under Pythagorean Fuzzy Set for Multiple Criteria Decisión Making¨, Complexity in Manufacturing Processes and Systems.doi.org/10.1155/2018/2602376
J.G. Izaguirre y M.R. Párraga, ¨Aplicación de las metodologías 8D y AMFE para reducir fallos en una fábrica de refrigeradoras¨, Industrial Data, vol. 20, no.2, pp. 61-70, 2017
W. K. Brauers and E. K. Zavadskas, “The MOORA method and its application to privatization in a transition economy,” Control and Cybernetics, vol. 35, no. 2, pp. 445–469, 2006
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial 4.0.
