Implementación de una metodología para la adaptación de la norma ISO/IEC 17025:2017 en un laboratorio cerámico

Jorge Sánchez-Molina; Anderson Oswaldo Flórez-Vargas; Leidy Katherine Peñaloza-Isidro; Johan Gustavo Peñaranda-Méndez

doi:10.61799/2216-0388.952

PDF (Spanish)

Implementation of a methodology for the adaptation of the ISO/IEC 17025:2017 standard in a ceramics laboratory

Jorge Sánchez-Molina

Universidad Francisco de Paula Santander

Anderson Oswaldo Flórez-Vargas

Universidad Francisco de Paula Santander

Leidy Katherine Peñaloza-Isidro

Universidad Francisco de Paula Santander

Johan Gustavo Peñaranda-Méndez

Universidad Libre

DOI: https://doi.org/10.61799/2216-0388.952

Published

2021-09-01

Issue

Vol. 11 No. S2 (2021)

Section

Articulos

License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite

[1]

Sánchez-Molina, J. et al. 2021. Implementation of a methodology for the adaptation of the ISO/IEC 17025:2017 standard in a ceramics laboratory. Mundo FESC Journal. 11, S2 (Sept. 2021), 143–154. DOI:https://doi.org/10.61799/2216-0388.952.

Download Citation

Dimensions Metrics

https://plu.mx/plum/a/?doi=10.61799/2216-0388.952

Keywords:
Abstract

water absorption test, ceramic laboratory, methodology, ISO/IEC 17025:2017 Standard

The ISO/IEC 17025 standard has helped laboratories in different parts of the world to operate in a consistent, impartial and competent manner, thus providing greater confidence in the results issued. In view of the above, the purpose of this research was to implement a methodological model for the adaptation of the ISO/IEC 17025 standard, applied to the water absorption test performed at the Ceramic Materials Research Center of the Francisco de Paula Santander University in Cúcuta, Colombia. For this purpose, a road map was drawn up consisting of five phases: Diagnosis, Adaptations, Training and verification of the method, Documentation and Start-up. The practice of this methodology revealed that there were delays in the initial state of the laboratory in terms of compliance with the standard; likewise, the needs that required adjustments were identified. On the other hand, staff training allowed for greater homogeneity in laboratory operation, which was reflected in the verification of the method, where the statistical analysis showed that there were no significant differences between the data measured by the analysts. As a result of the above, the documentation was carried out in accordance with the standard, and its implementation was satisfactory.

Implementation of a methodology for the adaptation of the ISO/IEC 17025:2017 standard in a ceramics laboratory

Published

Issue

Section

License

How to Cite

Dimensions Metrics

Keywords:

Abstract

Most read articles by the same author(s)

Language