FMEA application with MOORA for the evaluation of acasea
DOI:
https://doi.org/10.61799/2216-0388.627Keywords:
FMEA, MOORA, AHP, RPNAbstract
Failure mode and effect analysis (FMEA) is a method to identify and evaluate potential risks using RPN risk priority number to assess the influences of failures and thus be able to launch a recommended action. The RPN is the result of the combination of the severity (S), occurrence (O) and detection of the failure (D), on a numerical scale from 1 to 10. However, the use of the RPN tends to have defects as it is inconsistent when as summing the equalities of the importance’s of S, O, D. Therefore, this research aims to resolve the limitations represented by the FMEA method with the integration of the MOORA method, to evaluate we will use the fuzzy analytical hierarchy process (AHP), in which AHP is used to modify the values of RPN, the MOORA method is applied to examine the different alternative solutions that we have. Finally, we will apply to a process to verify the effectiveness of our fuzzy hybrid method in FMEA.
Downloads
References
J. Tixier, G. Desserre, O. Salvi y D. Gaston, ¨Review of 62 risk análisis methodologies of industrial plants¨, Journal of Loss Prevention in the Process Industries, vol. 15, no. 4, pp. 291-303, 2002
A.P. Subriadi y N.F. Najwa, ¨The consistency analysis of failure mode and effect analysis (FMEA) in information technology risk assessment¨, Heliyon, vol. 6, no.1, 2020
LL.C. Chrysler, Ford Motor Company, General Motors Corporation, Análisis de Modos y Efectos de Fallas Potenciales, cuarta edición 2008
M. Ekmekçioğlu y A.C. Kutlu, ¨A fuzzy hybrid approach for fuzzy process FMEA: An application to a spindle manufacturing process¨, International Journal of Computational Intelligence Systems, vol. 5, no. 4, pp 611-626, 2012
A.C. Kutlu y M. Ekmekçioğlu, ¨ Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP¨, Expert Systems with Applications, vol. 39, no.1, pp. 61-67, 2012
K. Chang, Y. Chang y I. Tsai, ¨Enhancing FMEA assessment by integrating grey relational analysis and the decision making trial and evaluation laboratory approach¨, Engineering Failure Analysis, vol. 31, pp. 211-224, 2013
H. Maleki y Y. Saadat, ¨Comparison of failure mode and effects analysis by using AHP vs. REMBRANDT system¨, International Journal of Industrial and Systems Engineering, vol. 14, no. 1, pp. 5-19, 2013
A. M. Mahmoodi y A. Mirzazadeh, ¨ A New Analysis of Failure Models and Effects by Fuzzy Todim with using Fuzzy Time Function¨, International Journal of Fuzzy Logic System, vol. 4, no. 2, pp. 7-21, 2014
I. Haq, Izhar, K. Shah, S. Anwar, M. T. Khan, B Ahmed y S. Maqsood, ¨ Fuzzy logic based failure mode and effect analysis of automotive powertrain assembly systems¨, Technical Journal, vol. 20(SI),no. 2(S), pp. 57-64, 2015
E. Bozdag, U. Asan, A. Soyer, S. Serdarasan, ¨Risk prioritization in Failure Mode and Effects Analysis using interval type-2 fuzzy sets¨, Expert Systems with Applications, vol.42, no. 8, pp. 4000-4015, 2015
M. Ahmadi, S. M. H. Molana y S. M. Sajadi, ¨ A hybrid FMEA-TOPSIS method for risk management, case study: Esfahan Mobarakeh Steel Company¨, International Journal of Process Management and Benchmarking, vol. 7, no. 3, pp. 397-408, 2017
A. Certa, M. Enea, G. M. Galante y C.M. La Fata, ¨ ELECTRE TRI-based approach to the failure modes classification on the basis of risk parameters: An alternative to the risk priority number¨, Computers & Industrial Engineering, vol. 108, pp. 100-110, 2017
J. K. Chen, ¨ Prioritization of corrective actions from utility viewpoint in FMEA application ¨, Quality and Reliability Engineering International, vol. 33, no. 4, pp. 883-894, 2017.
M. Hajimolaali, A. Kebriaeezadeh, A. Abdollahiasl, H. Safari y A. Yektadoost, ¨A new approach in identifying and evaluating quality risks in the pharmaceutical industry¨, Journal of Pharmacoeconomics and Pharmaceutical Management, vol. 3, no. ½, pp. 17-20, 2017
H. Zhao, J. X. You y H. C. Liu, ¨ Failure mode and effect analysis using MULTIMOORA method with continuous weighted entropy under interval-valued intuitionistic fuzzy environment¨, Soft Computing, vol. 21, no. 18, pp. 5355-5367, 2017
N. Banduka, D. Tadić, I. Mačužić y M. Crnjac, ¨Extended process failure mode and effect analysis (PFMEA) for the automotive industry: The FSQC-PFMEA¨, Advances in Production Engineering & Management, vol. 13, no. 2, pp. 206-215, 2018
T.L. Saaty. The analytic hierarchy process. McGraw-Hill, New York, 1980. (This book has been translated into Chinese by S. Xu et al.; information is available from them at the Inst. of Systems Engineering, Tianjin Univ., Tianjin, China.) (A translation into Russian by R. Vachnadze is currently underway.)
W.R. Magalhães y R.F.L. Junior, ¨A model based on FMEA and Fuzzy TOPSIS for risk prioritization in industrial processes¨, Gestão & Producão, vol. In press, 2020. https://www.researchgate.net/publication/343700369
L.P. Dominguez, L.A.R. Picon, A.A. Iniesta, D.L. Cruz y Z. Xu, ¨MOORA under Pythagorean Fuzzy Set for Multiple Criteria Decisión Making¨, Complexity in Manufacturing Processes and Systems.doi.org/10.1155/2018/2602376
J.G. Izaguirre y M.R. Párraga, ¨Aplicación de las metodologías 8D y AMFE para reducir fallos en una fábrica de refrigeradoras¨, Industrial Data, vol. 20, no.2, pp. 61-70, 2017
W. K. Brauers and E. K. Zavadskas, “The MOORA method and its application to privatization in a transition economy,” Control and Cybernetics, vol. 35, no. 2, pp. 445–469, 2006
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
